A conductive, graphite-filled hot compression mounting compound for the same mounting step as these brand products:
•
Buehler — KonductoMet
•
Struers — PolyFast
•
Allied High Tech — conductive mounting compound
Runs in Buehler, Struers, LECO, Allied, and PACE mounting presses with no change to your process. It is a comparable product for the same step — not a branded or drop-in item.
Same grading, typically 20–40% less.
Request a free sample and test it on your own press.
Graphite-Filled Conductive Mounting Compound
What This Product Is
A conductive, graphite-filled hot compression mounting compound. The graphite filler makes the cured mount electrically conductive, so the specimen can be examined or processed with techniques that require a conductive path — without applying tape, paint, or coatings.
Intended Use in Metallography
Used at the mounting step when the mount must conduct electricity. Selected when:
- Preparing samples for SEM (scanning electron microscopy) and EBSD
- Electrolytic polishing or etching, which need a conductive mount
- Avoiding conductive tabs, paint, or coatings on the mount
Typical Applications
- SEM and EBSD specimen preparation
- Electrolytic polishing and etching
- Electronic materials and conductive-path failure analysis
Beyond routine metallography, the conductive mount is commonly used across electron microscopy and electronics failure analysis , wherever a conductive mount is required.
Manufacturer’s product information (betadiamond.com, opens in a new tab)