The Direct Approach - Case Report & Steps in Composite Shade Selection to Create Perfect Restorations!

Inventor and a dentist, Dr. Sigal Jacobson is an internationally acclaimed lecturer with more than 23 years of experience in esthetic dentistry. She is named one of this year's Top 25 Women in Dentistry in the USA at the prestige DPR magazine. Dr Sigal published several articles in major dental magazines and invented the world renowned Uveneer™ system. She lectures globally on the subject of composite aesthetic restorations and minimally invasive dentistry that rely on adhesion for retention. She will be the first speaker at the historic DRDCA 2020 International.

Introduction

Composite restorations have become an integral part of any restorative dental practice and can be called “star of minimal invasion” due to its conservative concept. Recent developments in composite resin considerably improved the physical and esthetic properties, enabling practitioners to create esthetic restorations with excellent longevity and high patient’s satisfaction rate. 1 Many dentists consider direct composite placement in the anterior region to be a somewhat challenging procedure. Some of these challenges include: creating the final anatomical landmarks and contours, selecting the precise blending shade of composite and polishing it to perfection. In addition, many composite manufacturers propose the multi-layering protocol that requires placing an assortment of opacities and translucent shades to create a natural polychromatic effect. In clinical situations, the layering techniques are somewhat complicated, time consuming and hard to replicate when restoring multiple teeth. As a result, many dentists give up on the layering protocols and search for methods and materials that are simple and involve using one or two shades of composite only. This article will outline some efficient methods to create natural looking direct veneers using a single composite shade and a unique composite template system, the Uveneer kit. At the end of the article readers will be able to implement a protocol for accurate composite shade selection for anterior direct restorations and create consistently blending results using a single shade of composite only.

What is Uveneer?

The Uveneer template system by Ultradent is an assortment of templates that simulate the facial shape and anatomical landmarks of anterior teeth.

The kit consists of 32 templates from both upper and lower arch, premolar to premolar in two sizes and based on the conventional smile design rules and proportions therefore will fit most patients. Each template is made of a thermoplastic material that is reusable and autoclavable. The technique is simple: After applying composite on the facial surface of a prepped tooth and pressing the appropriate Uveneer template, one simple round of light curing (after which the template is removed), produces a hard, void-free restoration. Moreover, studies show that OIL (Oxygen Inhibition Layer) found on the outermost composite material , is softer and more susceptible to wear and stain.3 With light curing through the template the formation of the oxygen inhibition layer is prevented, and a glossy, durable restoration is formed which will retain gloss and color over time.

Case report

A young woman was embarrassed to show her teeth. Tooth No. 10 (21) was an implant crown restoration with poor match to the rest of the dentition (Figure 1).

The treatment option she was offered by another dentist to get satisfactory cosmetic results, was porcelain work on all anterior teeth . This approach proved to be beyond her budget, since her resources were diminished by her implant treatment. The treatment plan offered in this case with Uveneer was 3 composite veneers. This treatment was completed in 1.5 hr. Treatment Steps - Starting with the central incisors, the correct template is chosen (Figure 2). Note that its size and shape corresponds nicely to the tooth to be veneered. The teeth to be veneered required little preparation as they are retroclined.

After the insertion of retraction cord and sectional matrixes, the tooth was etched for 15 seconds (Figure 3). The tooth was sprayed with water for 5 seconds and gently dried. The adhesive system was then applied and cured for 20 seconds (VOCO America’s Futurabond U.)

A composite resin was then applied to the tooth’s labial surface without curing yet. A small amount of flowable composite was applied into the template (VOCO America’s GrandioSO) and pressed onto the uncured composite that had been laid on the tooth (Figure 4). Excess was removed from the periphery using a probe.

Then light curing was done throughout the template while pressing for 30 seconds (Ultradent Products’ VALO LED curing light) (Figure 5). The template was then removed.

Retraction cord and separators were also removed. Residual excess was cleaned from the periphery with flame-finishing diamond burs (Figure 6)

The Uveneer template will generate the shine on the buccal surface (Figure 7)

This procedure was followed for the adjacent central and lateral incisor (Figure 8) for a complete smile make-over (Figure 9).

How to select the correct composite shade?

One of the main challenges of creating anterior restorations beside creating the anatomy is matching the right composite shade to the tooth. This step is crucial and has a significant impact on the success of the restoration. There are a few factors that affect the final restoration shade -

• Appearance analysis indicate substantial variation between same shades from different brands (Figure 10).
• Different thickness of the same composite presents different shade and masking ability.
• The underlying tooth reflects on the composite and affect the final shade.
• A gray appearance of the composite can be caused by the projection of darkness in the oral cavity. 4
• Light curing and polishing changes the final shade.

To overcome these challenges here are 5 essential steps to follow: 1: Keep it simple! Spectrophotometry confirms that 90 percent of patients will present with an A hue. It is advised to reduce your composite inventory and avoid having unused shades in your armamentarium . The most common shades are A1, A2, A3, A3.5, A4, B1, bleach white and translucent shade.2: Divide your composites into roughly three groups according to the Value (low, medium, high) Value is the degree of lightness or darkness of the color material and is dictated by the transmission of light through, and reflectance from the material. Our vision is more sensitive to differences in value more then hue and chroma. Different brands of composite with the same shade may present with variance in shade value (Figure 10). as each brand applies different filler particles sizes and different matrix composition and opaques. Low-value composites Exhibit a light-diffusion property similar to natural tooth structure, with excellent tooth-blending properties. Low value composites are recommended to fix small enamel chips, Class V cavities, and cases when maximum blending with no changing or masking of the underlying tooth structure is required. Applying low-value composites in thicker layers may appear grayer in appearance. e.g. Clearafil Majesty Esthetic by Kuraray, Gaenial Universal Flow- GC America.Medium-value composites Used in many aesthetic cases. When applied in approx. 0.5mm thickness or more, they can mask, and at the same time incorporate, a “chameleon” and blending effect. Many of today’s Nano-composites are present as medium value in which the masking ability is controlled by the thickness applied. e.g Vitlescence by Ultradent, Admira by Voco.High-value composites When used in a thin layer, present with high opacity and masking ability, less to no tooth blending capabilities. Used in cases where changing the underlying tooth color is required, with minimal tooth preparation. e.g. Amaris by Voco, Gradia by GC One brand can also incorporate all three groups in its range. 3: Be familiar with your composites shade capabilities. It’s advisable not to change composite brands too often, as it takes time to get familiar with each one’s composite shade and value characteristics. 4: Prepare your individual shade guides When selecting a composite shade to match a tooth, a common mistake is using a ceramic shade guide that’s fabricated from materials that differ entirely from the composites. Therefore, it is advised to create an individual, custom-made composite shade guide that will generate an accurate and realistic representation of the composites on hand. The composite shade guide should look as close as possible to the contours and gloss of the final result. You can prepare it as follows - (Figure 11-13)